Introduction
1
Introduction
Congratulations on your purchase of the ETC
Sensor IQ Breaker Panel. This panel has a small footprint,
low heat dissipation, and low noise, allowing it to be installed in a variety of locations. Features of the
Sensor IQ panel include:
• Built-in time clock, preset, and DMX controls
• Built-in network interface provides per-circuit reporting and advanced control via streaming ACN
(sACN)
• Control for up to 48 intelligent breaker circuits
• Optional main breaker
• 120 V (bi-phase* available), 240 V, and 277 V
• Option cards allow for DALI control, 0–10 V control, and contact closure input
• UL924 listed emergency dry contact input suitable for connection to external emergency systems
• Isolated ground option for 120 V and 240 V panels only
*Bi-phase is commonly called single phase or 1 phase.
Using This Manual
This manual contains procedures for installation of the Sensor IQ Breaker Panel and the field-installed
options such as the 0–10V output control option card, contact input, and ride-thru option.
When viewing this document in electronic form (pdf file) with Adobe
Acrobat
®
Reader, blue italicized
text followed by a page number is a link within the document. If you click on the link, Acrobat will
navigate to that section or topic.
Document Conventions
This document uses the following conventions to draw your attention to important information.
Please email comments about this manual to:
All ETC documents are available for free download from our website at
.
Note:
Notes are helpful hints and information that is supplemental to the main text.
CAUTION:
A Caution statement indicates situations where there may be undefined or
unwanted consequences of an action, potential for data loss or an equipment
problem.
WARNING:
A Warning statement indicates situations where damage may occur, people
may be harmed, or there are serious or dangerous consequences of an action.
WARNING:
RISK OF ELECTRIC SHOCK! This warning statement indicates situations where
there is a risk of electric shock.
