Etatron America WATER METER SIGNAL SPLITTER, Инструкция по эксплуатации и техническому обслуживанию, Страница: 6 / 12

6
ENGLISH
WATER METER SIGNAL SPLITTER eMP
Operating principle
This equipment receives a reed input signal from a water meter counter and divides it into four equal and synchronous
reed output signals. It is possible to connect proportional dosing pumps and controller with analog inputs.
Technical features
•
Equipment manufactured according to CE regulation
•
Anti acid plastic casing
•
Front panel protected by adhesive film resistant to atmospheric agents and UV rays
•
Power supply: extended range 90 – 260 Volt 50-60 Hz
•
Prewired with 125 V nema 5-15P plug
•
IP65 protection level
•
Environmental conditions: closed environment, altitude up to 2000 m, ambient temperature from 41°F to
104°F, maximum relative humidity 80% up to a maximum of 88°F (linear decrease down to 50% at 104°F).
•
Classification with respect to protection against indirect contacts: CLASS I (the equipment is supplied with an
electrical protection conductor).
•
Galvanically isolated outputs
Reference Standards
The water meter signal splitter is in accordance with the following directives:
•
2006/95/CE: "low tension"
•
2004/108/CE: "electromagnetic compatibility"
Overall dimensions
Fig. 1 – Dimensions and plate for wall mounting.