ETAS
Commissioning
ES600.2 - User Guide
23
6
Commissioning
This chapter contains information about the following topics:
• “Assembly and Interlocking” on page 23
• “Applications” on page 26
• “Cabling” on page 27
6.1
Assembly and Interlocking
6.1.1
General installation recommendations
6.1.2
Fastening the module on a carrier system
The ES600.2 has a robust metal housing that is fitted with non-slip plastic feet.
The module can easily be screwed onto a carrier system for fastening in a vehi
-
cle or lab. The screw threads for fixing the module are already part of the hous
-
ing and easily accessible.
Fixing the housing of the ES600.2:
4. Remove the plastic feet at the underside of the module. To do
so, push a blunt screwdriver between housing bottom and
plastic foot.
5. Pry off the plastic foot.
Fig. 6
-
1
Prying off the plastic foot
A screw thread becomes visible under the plastic foot. The
threads for fixing the module are located at the underside of
the housing.
CAUTION
Damage or destruction of module is possible.
The modules are approved only for the installation and operation on compo
-
nents or at locations that ensure that the technical data of the modules are
maintained during its operation (see chapter 7 on page 30).