Introduction
8
1.2
About This Manual
This manual describes the ES590 ETK, CAN and K-Line Module and its use as
a calibration device.
1.2.1
Structure
The "Operation" chapter contains a description of the ES590 module, a
description of the control and measuring interfaces as well as instructions on
how to use it.
The "Technical Data" chapter contains a description of the corresponding pin
assignment and the technical data of the ES590.
The "Cables and Accessories" chapter and the "Ordering Information" chap-
ter contain an overview of the accessories and cables available for the ES590.
The final Chapter “ETAS Contacts” gives you information on ETAS’
international sales and service locations.
1.2.2
Typographic Conventions
The following typographic conventions are used in this manual:
boldface
is
used in the text to indicate what is written on the device; very important points
are shown in
italics
.
1.3
Further Information
If you need a description of the ETK interface, please contact ETAS.
Information on configuring your ES590 with INCA can be found in INCA
Online Help.
Using the ES590 with devices of the ES6xx series is described in the ES600
Module User’s Guide. The information given there applies to the ES590, too.
