ETAS ES1652.2, Руководство пользователя

Страница: 11 / 20

ES1652.2 Carrier Board for Signal Conditioning Circuits - User’s Guide 11
ETAS Hardware Description
2.2 Fuses
There are three fuses on the ES1652.2 Carrier Board that provide protection
against the voltages from the VMEbus backplane.
Fig. 2-3 Position of the Fuses on the ES1652.2 Carrier Board
The fuses are specified as follows:
Tab. 2-2
Fuses
2.3 Addressing the LEDs on the Front Panel
The LEDs are addressed via the "CO100" connector (see ""CO100" Connector"
on page 13).
The LEDs require around 10 mA to light up and have dropping resistors of 825
Ω
for operating with 5 V. If the LEDs are operated at another voltage, appropriate
dropping resistors must be connected in series on the relevant module.
Fuse Type Specification Safeguarding
(Backplane Connector)
FU100 NANO2® Slo-Blo
®
Fuse 452/454 Series
T 2 A VCC5
(A32/B32/C32)
FU101 NANO2® Slo-Blo
®
Fuse 452/454 Series
T 1 A VDD12
(C31)
FU102 NANO2® Slo-Blo
®
Fuse 452/454 Series
T 750 mA VSS12
(A31)
IN
1..9
OU
T
1.
.1
5
IC100
IC101
IC102
IC103
CO1
0
0
CO
10
1
FU100 FU101 FU102