eta ORBITO 1509, Инструкция по эксплуатации, Страница: 21 / 48

– Never use the appliance for any other purpose than for the intended one described in
these instructions for use! This appliance is not intended for outdoor use.
– The pictures are only illustrative, the supplied accessory and cleaner may differ.
– All text in other languages and pictures shown on the packaging, or the product itself,
are translated and explained at the end of this language mutation.
– WARNING : There is a risk of injury in case of incorrect use (not in accordance with the
manual) of the appliance.
– The manufacturer is not responsible for damage caused by improper use of the
appliance and the accessories and its warranty for the appliance does not apply in
situations when the safety warnings above are not complied with. Failure to replace or
maintain all filters regularly according to the instructions in Chapter IV. , V. and also using
non-original filters, the properties of which resulted in failure or damage of the vacuum
cleaner, is also understood to be improper use of the appliance.
For trouble-free operation of the vacuum cleaner, please use the
tested micro-filters recommended by the producer.
II. EQUIPMENT AND ACCESSORIES (fig. 1)
A – vacuum cleaner
A1 – suction vent A6 – container lock button
A2 – START/STOP button A7 – holder
A3 – power cord winding button A8 – exhaust filter
A4 – parking hole A9 – exhaust cover
A5 – power cord A10 – grid
B – dust container
B1 – holder B5 – lid
B2 – bottom lock button B6 – separator
B3 – bottom flap B7 – separator cover
B4 – textile micro-filter B8 – separator ring
C – accessories
C1 – floor nozzle C4 – upholstery nozzle
C2 – suction hose C5 – brush
C3 – suction tube C6 – crevice nozzle
III. VACUUM CLEANER PREPARATION
Hose
(Fig. 4)
– Connect hose
C2
to the vacuum cleaner by inserting the end piece to suction vent
A1
to the maximum position. You will hear a clicking sound.
– Disconnect the hose by pressing the buttons on the end piece and remove the hose
by pulling it slightly.
Telescopic tube (Fig. 3)
– You can connect tube C3 with hose handle C2 by slight pushing the handle to the tube.
– You can disconnect the tube by pulling the handle slightly out of the tube.
21
GB
/ 39