eta Fresco 0578, Инструкция по эксплуатации

Страница: 26 / 72

– Do not place the appliance below/near electrical socket and other electrical appliances.
– When handling the appliance, avoid causing any injury.
– Do not place any device with open flame in the air flow coming out from the appliance
because of danger of burning process interruption.
– Never expose yourself (or animals) to the air flow for an extended period of time.
It may cause health problems.
– Only use original components designed for this type.
– Holes for air ventilation must not be covered.
POWER CORD:
–
Never use the appliance if the power cord or power plug are
damaged, if the appliance is not correctly operating or if it has fallen
on the floor and been damaged, or if it has fallen into water. In such
cases take the appliance to a professional service centre to verify
its safety and correct function.
–
If the power cord of the appliance is corrupted, it has to be replaced
by the manufacturer, its service technician or a similarly qualified
person so as to prevent dangerous situations.
– Never put the power cord on hot surfaces and never let it hang over table edge or worktop
edge. If the cord is caught or pulled, e.g. by children, the appliance may overturn and fall
down, causing a serious injury!
– The power cord must not be damaged with sharp or hot objects, open fire, it must not
be sunk into water or bent over sharp edges.
– If you need to use an extension cord for justified reasons, it must be undamaged and
comply with the applicable standards.
II. DESCRIPTION OF THE APPLIANCE (Fig. 1)
A – Appliance body
A1 – outer moving blades (fixed)
A2 – inner moving blades (automatic)
A3 – handle
A4 – wheels
A5 – drainage hole for warm air
A6 – upper protective grate
A7 – bottom protective grate
A8 – drainage tube for condensed water
A9 – plug of the drainage pipe
B – Control panel with display
B1 – on/off button
B2 – blow speed setting button
B3 – mode setting button (automatic,
cooling, dehumidification, ventilator)
B4 – timer button
B5 – “+” button
B6 – “-” button
B7 – panel with a display and indicating
lamps
B8 – button of oscillation of the plates
B9 – night mode and lock button
GB
26 / 66