eta Brilanto 2v1, Инструкция по эксплуатации

Страница: 21 / 64

II. EQUIPMENT AND ACCESSORIES OF VACUUM CLEANER (Fig. 1)
A - vacuum cleaner
A1 -
I I
button A4 - handle
A2 - light signaling A5 - vacuum cleaner lid lock button
A3 - container lock button
B - dust container
B1 - HEPA filter B2 - filter protector
C - extension adapter
C1 -
I I
button C3 - handle lid lock button
C2 - nozzle lid lock button
D - floor nozzle with rotation brush
E - upholstery nozzle
E1 - brush E2 - crevice nozzle
F - holder
F1 - support lid lock button
G - support
G1 - power supply hub
H - charger
H1 - control light
III. VACUUM CLEANER PREPARATION
Remove all the packing material, take out the vacuum cleaner and the accessories.
Assembling holder (i.e. charging base)
Insert support G to holder F by slight pushing to the maximum position (you will hear
a snapping sound). To remove the support from the holder you have to push lock button
F1 and then to pull the support out (Fig. 2). Insert charger connector H to socket G1 in the
support by slight pushing (Fig. 3). Lead the battery charger cable through the groove in
the holder.
Assembling extension adapter
Straighten the handle of extension adapter C to the maximum working position (you will
hear a snapping sound). For tilting the handle you have to push lock button C3 (Fig. 4).
Slide floor nozzle D slightly to extension adapter C to the maximum position (you will hear
a snapping sound). After taking the nozzle from the adapter you have to push lock button
C2 and then to pull the nozzle out (Fig. 5).
Fixing vacuum cleaner into adapter
Put vacuum cleaner A to adapter C with the suction vent and they tilt the vacuum cleaner
to the aperture to the maximum position (you will hear a snapping sound). After taking the
vacuum cleaner from the adapter you have to push lock button
A5 and then to pull the
vacuum cleaner out (Fig. 6).
21
GB
For trouble-free operation of the vacuum cleaner, please use
tested micro-filters recommended by the producer.