eta 254190000F, Руководство пользователя

Страница: 57 / 104

57/101
EN
• Do not allow such substances to come into contact the appliance parts.
• Do not use any abrasive cleaners
• Remove the food from the freezer. Store them in a cool place, well covered.
• Switch the appliance off and remove the plug from the mains, or switch off or turn out
the circuit breaker of fuse.Clean the appliance and the interior accessories with a cloth
and lukewarm water. After cleaning wipe with fresh water and rub dry.
• After everything is dry place appliance back into service.
Clean drain hole
To avoid defrost water overflowing into the fridge, periodically clean the
drain hole at back of fridge compartment. Use a cleaner to clean the hole
as showed in right picture.
Replace the lamp
The internal light is a LED type. To replace the lamp, please contact qualified technician.
Defrosting of the freezer
The freezer compartment, however, will become progressively covered with frost. This
should be removed. Never use sharp metal tools to scrape off frost from the evaporator as
you could damage it.
However, when the ice becomes very thick on the inner liner, complete defrosting should
be carried out as fellows:
• Pull out the plug from the socket;
• Remove all stored food, wrap it in several layers of newspaper and put it in a cool place;
• Keep the door open, and placing a basin underneath of the appliance to collect the defrost water;
• When defrosting is completed, dry the interior thoroughly
• Replace the plug in the power socket to run the appliance again.
VI. TROUBLESHOOTING
CAUTION!
Before troubleshooting, disconnect the power supply. Only a qualified electrician of
competent person must do the troubleshooting that is not in this manual.
IMPORTANT!
There are some sounds during normal use (compressor, refrigerant circulation). These
sounds are not a reason for complaint!
Problem Possible cause Solution
Appliance does not
work
Temperature regulation knob is
set at number “0”.
Set the knob at other number
to switch on the appliance.
Mains plug is not plugged in or
is loose.
Insert mains plug.
Fuse has blown or is defective
(circuit breaker is OFF).
Check fuse, replace if
necessary (switch ON the
circuit breaker).
Socket is defective
Mains malfunctions are to be
corrected by an electrician.