eta 253390040E, Руководство пользователя

Страница: 47 / 96

EN - 47
EN
cabinet. To ensure best performance, if the appliance is positioned below an overhanging
wall unit, the minimum distance between the top of the cabi-net and the wall unit must be at
least 100 mm. Ideally, however, the appliance should not be positioned below overhanging
wall units. Accurate leveling is ensured by one or more adjust-able feet at the base of the
cabinet. This refrigerating appliance is not intended to be used as a built-in appliance.
WARNING!
It must be possible to disconnect the appliance from the mains power supply; the
plug must therefore be easily accessible after installation.
Electrical connection
• Before plugging in, ensure that the voltage and frequency shown on the rating plate
correspond to your domestic power supply. The appliance must be earthed. The power
supply cable plug is provided with a contact for this purpose. If the domestic power
supply socket is not earthed, connect the appliance to a separate earth in compliance
with current regulations, consulting a qualified electrician.
• The manufacturer declines all responsibility if the above safety precautions are not
observed.This appliance complies with the E.E.C. Directives.
IV. DAILY USE
First use / cleaning the interior
• Before using the appliance for the first time, wash the interior and all internal accessories
with lukewarm water and some neutral soap so as to remove the typical smell of a brand
new product, then dry thoroughly.
IMPORTANT!
Do not use detergents or abrasive powders, as these will damage the finish.
Temperature Setting
Plug on your appliance. The internal
temperature is controlled by a thermostat.
There are 8 settings:
*1 is warmest setting;
*7 is coldest setting;
*0 is off.
The appliance may not operate at the correct
temperature
if it is in a particularly hot or if you open the
door often.