eta 154190000F, Руководство пользователя

Страница: 64 / 88

EN - 64
EN
Clean drain hole
To avoid defrost water overflowing into the fridge, periodically clean the
drain hole at back of fridge compartment. Use a cleaner to clean the hole
as showed in right picture for example.
Not included in the delivery of the appliance.
Replace the lamp
The internal light is a LED type. To replace the lamp, please
contact qualified technician.
Defrosting of the freezer
The freezer compartment, however, will become progressively covered with frost. This
should be removed. Never use sharp metal tools to scrape off frost from the evaporator as
you could damage it.
However, when the ice becomes very thick on the inner liner, complete defrosting should
be carried out as fellows:
• Pull out the plug from the socket;
• Remove all stored food, wrap it in several layers of newspaper and put it in a cool place;
• Keep the door open, and placing a basin underneath of the appliance to collect the
defrost water;
• When defrosting is completed, dry the interior thoroughly
• Replace the plug in the power socket to run the appliance again.
VI. TROUBLESHOOTING
CAUTION!
Before troubleshooting, disconnect the power supply. Only a qualified electrician of com -
petent person must do the troubleshooting that is not in this manual.
IMPORTANT!
There are some sounds during normal use (compressor, refrigerant circulation). These
sounds are not a reason for complaint!
Problem Possible cause Solution
Appliance does not
work
Temperature regulation knob is
set at number “0”.
Set the knob at other number
to switch on the appliance.
Mains plug is not plugged in or
is loose.
Insert mains plug.
Fuse has blown or is defective
(circuit breaker is OFF).
Check fuse, replace if necessary
(switch ON the circuit breaker).
Appliance does not
work
Socket is defective
Mains malfunctions are to be
corrected by an electrician.