eta 0568, Инструкция по эксплуатации

Страница: 23 / 60

POWER CORD:
–
Never use the appliance if the power cord or power plug are
damaged, if the appliance is not correctly operating or if it has
fallen on the floor and been damaged, or if it has fallen into water.
In such cases take the appliance to a professional service centre
to verify its safety and correct function.
–
If the power cord of the appliance is corrupted, it has to be
replaced by the manufacturer, its service technician or a similarly
qualified person so as to prevent dangerous situations.
– Never put the power cord on hot surfaces and never let it hang over table edge or
worktop edge. If the cord is caught or pulled, e.g. by children, the appliance may overturn
and fall down, causing a serious injury!
– The power cord must not be damaged with sharp or hot objects, open fire, it must not be
sunk into water or bent over sharp edges.
– If you need to use an extension cord for justified reasons, it must be undamaged and
comply with the applicable standards.
II. DESCRIPTION OF THE APPLIANCE (Fig. 1)
A – Cooler body
A1 – Outer moving blades (fixed)
A2 – Inner moving blades (automatic)
A3 – Watermark
A4 – Wheels
(item No. ETA056800110)
A5 – Water tank
(item No. ETA056800070)
A6 – Tank for down-flowing water
A7 – Down-flowing water hole
A8 – Pump
(item No. ETA056800080)
A9 – Pump arresting locks
A10 – Cooling pad
(item No. ETA056800010)
A11 – Pad cover
A12 – Water discharge holes
A13 – Arresting lock cover
A14 – Cover fixing screws
A15 – Power cable
B – Control panel with display
B1 – On/off button
B2 – Blowing mode button
B3 – Moisturising button
B4 – Timer button
B5 – Inner blades oscillation button
B6 – Blowing speed setup button
B7 – Ionization button
B8 – Cooling button
B9 – Blowing speed setting icon
B10 – Activated cooling icon
B11 – Activated ionization icon
B12 – Activated blades oscillation icon
B13 – Timer display
B14 – Activated moisturising icon
B15 – On/off icon
B16 – Normal mode icon
B17 – Natural mode icon
B18 – Sleep mode icon
C – Remote control unit
(ETA056800090)
C1 – On/off button
C2 – Cooling button
C3 – Blowing speed setup button
C4 – Blowing mode button
C5 – Inner blades oscillation button
C6 – Ionization button
C7 – Moisturising button
C8 – Timer button
D – Cooling box (300 ml)
E – Tightening spanner
23
GB
/ 55