43
GB
/ 75
ATTENTION: Never pour water into the MW oven!
Door
Door and door sealing must remain clean. Wash only with warm water with soap and then
dry thoroughly. Do not use any abrasive agents such as cleaning powders or metal or plastic
scrapers. Metal parts are best maintained by wiping them frequently with a damp cloth.
Outer parts
Clean outer casing with a fine cloth with warm water, then dry it with a soft cloth.
Make sure that water does not get to the inner parts. If the supply cord gets dirty, wipe
it with clean cloth. Always make sure that the surface of the door sealing is clean.
Turning plate
Clean the glass plate in clean water after each use. Remove the turning circle and clean it
in hot water with soap once a week. It is also necessary to maintain the guiding are clean so
that grease does not prevent the wheels to turn. Otherwise, the noisiness of the oven might
increase.
XI. ENVIRONMENTAL PROTECTION
If the dimensions allow, there are labels of materials used for production of packing,
components and accessories as well as their recycling on all parts. The symbols specified
on the product or in the accompanying documentation mean that the used electrical or
electronic products must not be disposed of together with municipal waste. For proper
disposal of the product, hand it over at special collection places where it will be received free
of charge. Suitable disposal of the product can help to maintain valuable natural resources
and to prevent possible negative impacts on the environment and human health, which
could be the possible consequences of improper waste disposal. Ask for more details at the
local authorities or at a collection site. Fines can be imposed for improper disposal of this
type of waste in agreement with the national regulations. If the appliance is to be put out
of operation, after disconnecting from power supply we recommend its cutoff and in this way
it will not be possible to use the appliance again.
More extensive maintenance or maintenance requiring intervention in the inner parts
of the appliance must be carried out by professional service! Failure to comply with the
instructions of the manufacturer will lead to expiration of the right to guarantee repair!
XII. TECHNICAL DATA
Voltage (V)
shown on the type label of the appliance
Input (W)
shown on the type label of the appliance
Microwave power (W)
700
Dimensions W x H x D (mm)
- outer
440 x 259 x 349
- inner
306 x 206 x 304
-
turning plate
255
Volume (l)
20
Weight (kg) approx.
10.3
Input in off mode is < 0,50 W.
Содержание 0209
Страница 80: ...e 23 2016 DATE30 6 2016...