eta 0059, Инструкция по эксплуатации

Страница: 17 / 32

For disassembling the appliance proceed following (pic. 3):
- Press release buttons A3 on both sides of the mixer body. The mixing attachment B will
detach from the masher body A .
- If you wish to remove the attachment blade A4 , turn it anti-clockwise.
- Proceed reversely for assembling.
Clean the masher body unit A with a soft damp cloth and soap. Make sure water does not
get inside the inner parts. Wash all other accessories immediately after use in hot water
with soap, rinse with clean water and wipe dry (you may use a dish-washer – but not for
the masher A ). The end with the masher shaft B must not be immersed when cleaning.
Food residues on the attachment B may be removed by rotating the mashing head on the
edge of the utensil.
Some food can colour the accessories in some way. But this does not affect the function of
the appliance and it is not a reason for a claim. This colouring usually disappears in some
time. Never dry plastic moldings over a heat source (e. g. heater, stove, radiator).
Store the appliance after cleaning at a dry, dustfree and safe place, out of reach of children
and incapacitated people.
V. ENVIRONMENTAL PROTECTION
If the dimensions allow, there are labels of materials used for production of packing,
components and accessories as well as their recycling on all parts. The symbols specified
on the product or in the accompanying documentation mean that the used electrical or
electronic products must not be disposed of together with municipal waste. For proper
disposal, hand them over at the special collection places where they will be accepted free
of charge. Suitable disposal of the product can help to maintain valuable natural resources
and to prevent possible negative impacts on the environment and human health, which
could be the possible consequences of improper waste disposal. Ask for more details at
the local authority or at a collection site. Fines can be imposed for improper disposal of this
type of waste in agreement with the national regulations. If the appliance is to be put out
of operation, after disconnecting it from power supply we recommend its cutoff and in this
way it will not be possible to use the appliance again.
More extensive maintenance or maintenance requiring intervention in the inner parts
of the appliance must be carried out by professional service!
Failure to comply with the instructions of the manufacturer will lead to expiration of
the right to guarantee repair!
VI. TECHNICAL DATA
Voltage (V) specified on the type label
Input (W) specified on the type label
Weight of drive unit (kg) about 0,73
The product has received EC declaration of conformity according to Act as amended.
The product matches the requirements of the below statutory order as amended.
17
GB