36
37
4. Once you have successfully bonded your devices, this will be shown in
the smartphone’s display. The ESYSTA
®
BT Pen display shows “bo nd”.
“Done” takes you out of configuration mode.
Your devices are now connected to each other. The Pen data can be imported
via your smartphone into the ESYSTA
®
App.
If you use several ESYSTA
®
BT Pens for your treatment and want
to integrate them into the ESYSTA
®
App, select the “Add device”
function again and repeat steps 1 to 4 for each individual Pen.
Note:
Ideally, you should always keep transfer mode active so that your current
treatment data is always available in the ESYSTA
®
App. The ESYSTA
®
BT Pen
can only exchange data with a smartphone. Any attempt to connect to other
devices will not work. Even if you are using the ESYSTA
®
App on a second
smartphone and search for the Pen, you will not find it there. If however
you want or have to do this anyway, for example because you have a new
phone, then you must cancel the connection (“bonding”) between the previous
smartphone and the ESYSTA
®
BT Pen (see Chapter 9.2).
