Operation via the 230 V button
Doc. no. MA007828_00
30 / 34
EN
To activate the microphone:
1. Press the
button to activate simple programming mode.
The dark blue LED is lit.
The detector goes into programming mode.
2. Press the
button to start the acoustic sensor setting.
3. Adjust the noise sensitivity. Click
• the
button to activate the acoustic sensor with maximum sensi-
tivity.
• the
button to activate the acoustic sensor with 75% sensitivity.
• the
button to activate the acoustic sensor with 50% sensitivity.
• the
button to activate the acoustic sensor with minimum sensitiv-
ity.
4. Press the
button to exit programming mode.
The microphone is activated with the required sensitivity.
To deactivate the microphone, you have to perform a reset to fac-
tory settings.
8
Operation via the 230 V button
Switch on/off:
1. Press and hold the button for one second.
When you release the button, the green LED flashes for confirma
-
tion.
The light is switched on if it was previously off.
The light is switched off, if it was previously on.
4hr On/Off:
1. Press and hold the button for 3 seconds.
The light is switched on for 4 hours it was previously off.
The light is switched off for 4 hours it was previously on.
12hr On/Off:
1. Press and hold the button for 5 seconds.
The light is switched on for 12 hours it was previously off.
The light is switched off for 12 hours it was previously on.
The set lighting status remains active for as long as the detector is detect-
