The app menu <Settings>
Doc. no. BA012497_02
89 / 107
GB
Setting the afterglow in minutes:
Tap on the button for the menu item
Mode for afterglow
.
A selection menu appears.
Choose the <Minutes> setting and confirm your selection.
Tap on the button for the menu item
Afterglow for
A settings menu appears.
Set the required duration and confirm your selection.
The afterglow is now set in minutes.
Adjusting the afterglow using a start and end time:
Tap on the button for the menu item
Mode for afterglow
.
A selection menu appears.
Choose the <Time> setting and confirm your selection.
Tap on the button for the menu item
From time
.
A settings menu appears.
Set the required start time and confirm your selection.
Tap on the button for the menu item
To time
.
A settings menu appears.
Set the required end time for the orientation light and confirm your
selection.
The afterglow is now set with a start and end time.
Setting a start and end time is not the same as timer control.
If the switch-off delay time in normal operation mode and the
switch-off warning time elapse before the orientation light is due
to start, the Light Control Box switches to energy-saving mode
without illumination. The time-controlled orientation light is then
not activated.
If you want to be sure that the orientation light remains lit over-
night, set the start time to a time when movement will still be
detected. After the off delay time has elapsed, the light then
switches to orientation light mode.
Difference from
time switching
control