The <Functions> remote control menu
Doc. no. BA012497_02
40 / 107
GB
Programming
Scene editor
CH1 %
CH2 %
CH3 %
CH4 %
DS 1
DS 2
Scene
Calendar
Years
Months
Days
Hours
Minutes
Seconds
Factory reset
Reset editor
Sensitivity
Detector LEDs On
Detector LEDs Off
Light value on
Light value off
Detector Fact. reset
Detector Light Factor
Table 2: “Programming” menu with sub-menus
7
The <Functions> remote control menu
Settings made in the <Functions> menu item are executed temporarily but
not stored as a new basic setting. When settings are made in this menu, the
Light Control Box is therefore in override mode.
In the <Functions> menu, there are two settings that are not temporary but
stored permanently:
• Scene changes via the <Store scenes> command
• Activate/deactivate the KNX programming mode
7.1 Channel 1, 2, 3 and 4
The sub-menu items for <Channel 1>, <Channel 2>, <Channel 3> and
<Channel 4> are identical. For each lighting channel, the following func-
tions are possible in the sub-menus:
Exceptions:
Permanent
settings