ESYLUX DEFENSOR MD 200 24 IR 1C IP55 AH, Руководство по эксплуатации

Страница: 41 / 44

GB
41 / 44
MA01708100
Technical data
Fault Cause
The lighting does not switch
off automatically
- The switch-off delay time has not
yet elapsed
- Check whether the sensor head and
mounting base are connected properly.
In some cases
vandalism and sabotage
protection is active
- Time-dependent operating modes
are active
Lighting switches on
automatically without
movement
- There are objects in the field of detection,
e.g. trees / bushes moved by the wind
- Time-dependent operating modes
are active
The lighting switches off
automatically in twilight,
despite movement
- The level of ambient light is above the
configured brightness switching value
- Lighting has been switched off manually
- Time-dependent operating modes
are active
Buttons do not work
- Device is still in the warm-up phase
- The push button was used without the
neutral conductor connected
- The push button is not routed to the
S terminal
The motion detector does
not react - No power supply; check the mains
voltage.
10. Technical data
Mounting
Installation type Surface mounting
Installation position Wall / Ceiling
Connection
NYM 3 x 1.5 mm² ... NYY 5 x 2.5 mm²
Ø min. 2 x 9 mm ... Ø max. 2 x 15 mm