ESX Quantum QE80.8DSP, Руководство пользователя

Страница: 27 / 44

27
FUNCTIONAL INSTRUCTIONS
REMOTE FEATURES AND OPERATIONAL CONTROLS
4
3
2
1
With the INPUT button you are able to switch between the signal inputs of the audio sources MAIN , AUX IN and OPTICAL .
MAIN is the input LINE IN (Page 6, #1) and SUB IN (Page 6, #2) or HIGH LEVEL INPUT (Page 6, #4) if selected.
If you have connected the optional audio streaming module to WiFi-BOX (see page 6, #6) and paired an audio source with it,
the WiFi-BOX will be automatically recognized as an input source from the amplifier and remains active as long an audio signal
is played.
With the two MODE buttons you can choose between the settings, which are stored in the DSP.
Use the buttons to select the desired setting and confirm with OK (# 3).
The LED display shows the values when turning the knob (# 1) or the number of the selected settings.
With this knob the overall volume of the sound system can be controlled. If you press and hold the knob for 3 seconds, the bass
level of output SUB OUT (G / H) can also be controlled.
3 4
VOLUME
MAIN
AUX
OPTICAL
INPUT MODE OK
–
+
VOLUME
MAIN
AUX
OPTICAL
INPUT MODE OK
–
+
1 2
Important note: The remote control must always be connected.
CABLE SET HIGH LEVEL AUDIO INPUTS
ASSIGNMENT
1) BROWN/BLACK SUB R –
2) BROWN SUB R +
3) ORANGE/BLACK SUB L –
4) ORANGE SUB L +
5) PURPLE/BLACK REAR R –
6) PURPLE REAR R +
7) GREEN REAR L +
8) GREEN/BLACK REAR L –
9) GREY FRONT R +
10) GREY/BLACK FRONT R –
11) WHITE FRONT L +
12) WHITE/BLACK FRONT L –
1 3 5 7 9 11
2 4 6 8 10 12