Estun EP1000 PLC, Быстрое руководство пользователя

Страница: 25 / 31

EP1000 PLC Quick User Manual
22
2 Hold down the left mouse button and drag the coil onto the second network.
3 Click on the ??? above the coil and enter the following address: Q0.0 .
4 Press the Return key to enter the address for the coil.
Step 4 Entering Network 3: Resetting the Timer.
When the timer reaches the preset value (100) and turns the timer bit on, the contact for
T33 turns on. Power flow from this contact turns on the M0.0 memory location. Because
the timer is enabled by a Normally Closed contact for M0.0, changing the state of M0.0
from off (0) to on (1) resets the timer. To enter the contact for the timer bit of T33:
1 Select the Normally Open contact from the bit logic instructions.
2 Hold down the left mouse button and drag the contact onto the third network.
3 Click on the ??? above the contact and enter the address of the timer bit: T33
4 Press the Return key to enter the address for the contact.
To enter the coil for turning on M0.0:
1 Select the output coil from the bit logic instructions.
2 Hold down the left mouse button and drag the output coil onto the third network.
3 Double-click the ??? above the coil and enter the following address: M0.0
4 Press the Return key to enter the address for the coil.
Step 5 Saving the Sample Project.
After entering the three networks of instructions, you have finished entering the program.
When you save the program, you create a project that includes the S7-200 CPU type
and other parameters. To save the project:
1 Select the File > Save As menu command from the menu bar.
2 Enter a name for the project in the Save As dialog box.
3 Click OK to save the project.
After saving the project, you can download the program to the EP1000 PLC.
----END
3.4 Download the Sample Program
1 Open the sample program.
2 Select the File > Download menu command from the menu bar.
3 Click OK on the pop-up dialog box to download the elements of the program to the
EP1000 PLC.