estos CSTA, Руководство по установке

Страница: 7 / 22

estos ECSTA for Panasonic
7

Windows Server® 2012 R2
2.2 Installation
For installation and administration of the driver see Driver management.
When setting up the driver, follow these steps:
1. Configure telephone system
Check the PBX Configuration.
2. Run driver setup
Launch the ecstaPanasonic.msi (32 Bit Systems) or ecstaPanasonic_x64.msi (64 Bit Systems).
3. Establish the connection to the PBX System
Configure the connection to the PBX system. Each instance of the driver supports the connection to
one PBX system.
4. Line configuration
The driver to automatically load all currently available devices from the PBX system.
2.3 Driver Management
Installation
Using the Windows® Installer (msi) packet, the driver will be installed on the system.
Driver instance
The driver can be used to connect one or more PBX systems. For each PBX system you want to connect, you
must configure one instance of the driver.
Register at Tapi System
During the installation, an instance in the already selected driver is registered at the Tapi System. For this
purpose you indicate the necessary data in a Wizard in order to connect the driver with the telephone
system.
Configuration of driver instance
The configuration of the driver instances takes place either via Telephone and Modem options in the Control
Panel or via the provided program Advanced Telephone Driver options that can be found in the Control Panel
or Start menu.
Updates
To install an Update start the Windows® Installer Packet (msi).
If an instance of the driver is configured, it will be removed during the update process. It will be
automatically re-added afterwards.
Deinstallation
Deinstallation takes place via Windows® Software Administration. In the Deinstallation, all instances of the
driver are removed from the Tapi System and the software is uninstalled.
2.4 Configure telephone system
The PBX system configuration can be accessed using the Panasonic PBX Unified Maintenance Console.
CTI Port Number
The default setting for the CTI Port Number is 33333.
Required licenses in the PBX system