estos CSTA, Руководство по установке

Страница: 19 / 22

estos ECSTA for Panasonic
19
4.4 Connection to the PBX system
Connection to the PBX system
The connection to the PBX system is established using TCP. Enter the Host Name or IP Address of the PBX
system. The default port for TCP is 33333.
Connection Status
Here you can see if the CSTA Multiplexer has established a connection to the PBX System. As long as there is
an active connection you will see additional information.
4.5 CSTA Server
This dialog is used to configure the CSTA server.
TCP port and IP interface
On this IP Port (Default 33333) the CSTA Server listens for incoming TCP connections (no encryption).
In case you are only using a local CSTA application that is installed on the same computer, you may choose
the local IP interface '127.0.0.1' here.
TLS port and IP interface
On this IP Port (Default 33334) the CSTA Server listens for incoming TLS connections (encrypted).
This requires a TLS/SSL certificate.
Certificate for the TLS/SSL communication
For the encrypted communication over TLS (Transport Layer Security), a server certificate is required. A
server certificate is used to uniquely identify a server. The certificate must be issued to the FQDN (fully
qualified domain name) of the server. The server certificate must be issued by a trusted certifiation
authority.
Certificates are configured in the Certificate Snap-In of the Management console (MMC).
The certificate must be saved in the 'Local Computer' certificate store. They must contain a private key. The
'Local Computer' certificate store can be opened using the MMC console.

From the Windows® start menu choose Run... and enter mmc.exe
 Choose File | Add/remove SnapIn...
 Choose Add . From the list of available Snap-Ins choose Certificates . Choose Computer account ,
Local computer and press Finish
 In the list navigate to Certificates (Local computer) / Personal Certificates
A certificate can be issued either in the own company using a 'Windows® Certificate Authority' or from
several companies like http://www.startssl.com.
CSTA Login
Enter a user name and password. This login is required by the estos ECSTA for Panasonic driver to connect to
this server. The default user is 'admin', the default password is 'admin'. For unencrypted TCP connections
the login is not required. This allows third party applications that normally connect directly to the PBX
system to use this Multiplexer. For SSL/TLS connections the login is required.
4.6 Server Service
On this dialog you see the status of the server service and you may start and stop the server service.
Server Service
The CSTA Multiplexer runs a Windows® System Service. The Service is registered during installation and
started after configuration.