estos CSTA, Руководство по установке

Страница: 6 / 22

estos ECSTA for Panasonic
6
2 ECSTA Tapi for Panasonic
estos ECSTA for Panasonic can be used to control and monitor telephone devices attached to a Panasonic
PBX system. The driver can be installed in multiple instances. Each driver instance supports the connection
to one PBX system.
The connection to the PBX system is established using CSTA Phase III.
The connection may be established using LAN (TCP/IP) only.
Super-Twin Features
The driver supports the Super-Twin feature. A DECT system phone is paired to a desk phone. The driver
automatically detects this situation. When making an outbound call using the DECT phone, it cannot
automatically dial handsfree. It is required to press the hookswitch on the DECT phone.
The driver can automatically load all currently available devices from the PBX system.
For Installation of the driver see Driver Installation.
For administration and configuration of the driver see Driver Administration.
2.1 Requirements
A Panasonic PBX system is required. The following series are supported:

KX-TDA30
 KX-TDA50
 KX-TDA100/200
 KX-TDA600
 KX-TDE100/200

KX-TDE600

KX-NCP500/1000
 KX-NS Series
 KX-NSX Series
The connection may be established using LAN (TCP/IP) only.
The connection to the PBX system is established using CSTA Phase III.
Licenses in the PBX system:
For the PBX series KX-NS a 3rd Party CTI Link license (Activation Key: KX-NSF101 or KX-NSA020) is required.
For the PBX series KX-NSX a 3rd Party CTI Link license (Activation Key: KX-NSXF004) is required.
For the PBX series KX-NCP/TDE/TDA no 3rd Party CTI Link license is required.
To use this drivers in combination with a KX-NSX series PBXs, estos ProCall release version 5.0.70 or later is
required.
The estos ECSTA for Panasonic can be installed on all Windows® systems that support Microsoft® TAPI 2.0 or
higher. The following systems are supported in 32- as well as in 64-bit versions.
 Windows® 7
 Windows® 8
 Windows® 8.1
 Windows® 10

Windows Server® 2008
 Windows Server® 2008 R2
 Windows Server® 2012