26
Allen key into the connector key hole and pressing down. Then insert
the cable termination and just release the connector key. (drawing 21)
21
NB!
When connecting the speaker to the amplifier please make sure
that the amplifier is in the off position. Connect the speaker cable to
the pole terminal on the back of the speaker: speaker terminal „+“ with
the amplifier terminal „+“ and „–“ with „–“. For signal flow, please follow
the direction marked on the cable or in the cable manufacturer’s
instructions. Typically, the signal flow is in the same direction as the
labelling/writing on the cable.
4.4. Setup recommendations by Alfred Vassilkov
The set-up of the sound consists of the balance between
different parameters such as tonality, bass accuracy, focus, stage
imaging, depth, etc. The time required for this process depends on the
listener’s experience and skills. Proper setup will maximize the
speakers’ performance.
