background image

When using electrical appliances, basic safety precautions should always be followed,

including the following:

1 .  Keep the working around surrounding the machine clean and organized .

2 .  Consider environmental conditions surrounding the machine . Do not use the machine in humid, 

wet or poorly lit environments . Do not use the machine close to flammable liquids or gas .

3 .  Keep machine away from children and non-authorized personnel . Do not permit them to go near 

the machine or its working area .

4 .  Do not touch the switch or cable with wet hands .

5 .  Only utilize the machine with the correct voltage to achieve optimum results .

6 .  Do not wear low-hanging clothing or items that may get caught in the machine . Wear non-slip 

shoes while working with the machine . For hygiene and safety, keep hair tied back and wear 
protective gloves .

7 .  Do not tug on the cable to remove the plug from the outlet . Do not leave the cable near sharp 

objects, water or solvents .

8 .  Remove the plug when the machine is not in use, you are cleaning the machine or need to move 

the machine . 

9 .  Check that the machine is not damaged prior to each use . Carefully check that all safety devices 

are working, that the removable parts are not blocked, there are no parts damaged, that all the 
parts have been set up correctly and that all conditions that could influence the regular function 
of the machine are in working order .

10 . If the machine is damaged or there are issues during its use, turn off the machine immediately 

and contact the manufacturer for assistance or repair . Repairs should only be made by qualified 
technicians, using the correct manufacturer parts . Non-compliance with these rules may void 
the warranty .

NOTE: Save these instructions for future reference.

SAFETY

2.

Содержание 348EDS12D










Отзывы: