6
COOKTOP USE
Cooktop/Oven Temperature Controls
Before setting a control knob, place filled cookware on the grate.
Do not operate a burner using empty cookware or without
cookware on the grate.
To Set Burner Temperature:
1.
Push in and turn knob counterclockwise to HI.
2.
Turn knob to anywhere between HI and LO. Use the following
chart as a guide when setting heat levels.
3.
To turn off surface burners, turn knobs clockwise to the “Off”
position.
To Set Oven Temperature:
Push in and turn oven control knob to desired temperature
setting.
Pilot Lights
To Light Standing Pilot Lights:
Before using the range, the standing pilots must be lit. They will
stay lit after turning off the burners.
1.
Make sure all controls are off and the oven and cooktop are
cool.
2.
Remove surface grates from the cooktop.
3.
Lift the cooktop by both front corners until the side support
rods lock into place.
4.
Using a match, light both burner pilot lights.
5.
Push back on the side support rods and slowly lower the
cooktop until it snaps into place.
6.
Push in and turn each surface burner control knob to the “HI”
position. The flame should light within 4 seconds.
7.
If surface burners do not ignite, repeat steps 3 to 6.
8.
Replace cooktop grates.
SETTING
RECOMMENDED USE
HI
■
Start food cooking.
■
Bring liquid to a boil.
MED (Medium)
■
Hold a rapid boil.
■
Quickly brown or sear food.
■
Fry or sauté foods.
■
Cook soups, sauces and gravies.
■
Stew or steam foods.
LO
■
Keep food warm.
■
Simmer.
WARNING
Fire Hazard
Do not let the burner flame extend beyond the edge of
the pan.
Turn off all controls when not cooking.
Failure to follow these instructions can result in death
or fire.
A. Support rods
A
