7
EST-64 GSM Remote Control Device
EST-64– USER MANUAL – Rev.2.4 – Technical Support:
1-800-640-4283
COPYRIGHT ©2008 Estate Swing
not the case, or eventually even change operator with another that serves your area
better.
The EST-64 also comes with additional 1 Input and 1 Output. The output is connected to
an on-board relay which can be activated by sending an SMS command. The Input can
be used to generate alarms when triggered. It also can be programmed to count the
input active pulses up to 1ms fast or activate the output relay.
Note:
When used as counters input work only in ACTIVE HIGH mode. They count ONLY
High Going Pulses.
One of the most important functions is to receive alarms. In order to do this properly,
you must program the administrator numbers, turn on the function of the input and tell
the EST-64 which are the recipient numbers and who should receive the alert message
for the particular input.
The 8 administrator numbers can be programmed with a text command via SMS.
Text Command:
#TEL
[N]
=
XXXXXXXXXX
N stands for administrator number
1
–
8
(position)
XXXXXXXXXX stands for the phone number you want to program as administrator.
•
To
add
a
number,
the
syntax
of
the
command
is
the
following:
#PWD123456#TEL1=3593334444
Please note that it is possible to program up to a maximum of 16 digits for a number.
5.
ADDITIONAL INPUT & OUTPUT PROGRAMMING INSTRUCTIONS
5.1
INPUT SETTINGS
5.1.1 PROGRAMMING THE ADMINISTRATOR NUMBER
