5.
Fuselage rigging is done.
COVERING, FINAL ASSEMBLY and
EQUIPMENT INSTALLATION
1.
Cover above stabilizer with light film, insert and glue the
part(S16) and then cover below stabilizer.
6.
Glue stabilizer, struts(S14-S15) and vertical fin to the
fuselage with thick CA.
(Horizontal tail must be at right
angle to fuselage center and vertical fin must be at
right angle to horizontal tail.)
Page 7
7.
Install receiver, ESC, elevator and rudder servos.
8.
Install motor and gearbox.
11.
Cover fuselage sides with light film.
12.
Glue seat and control stick.
13.
Cover right and left wings with light film
