2.
Remove rudder from the plan and glue the parts(R9-
R14).
Apply
thick CA glue
at each joints for reinforcing and then
carefully sand surfaces.
5.
Remove horizontal tail from the plan and glue small
sheets(S12-S13, E7).
6.
Apply
thick CA glue
at each joints for reinforcing and
then carefully sand surfaces.
Page 2
LEFT WING
1.
Pin the wing jigs on the plan.
2.
Lay leading edge, trailing edge, lower spars and ribs(W1-
W3, W6, W9-13, W19, W20) on the jigs.
4.
Assemble and glue upper spars(W1-W2, W9-W11) and
wingtip parts(W8, W21-23) with thick CA.
5.
Glue covering sheets(W14-W15, W17) and small
sheets(W18).
