Esta 05.003 Скачать руководство пользователя страница 37 | Manualshive

Страница: 37 / 48

Esta 05.003 Скачать руководство пользователя страница 37

7. Maintenance &

troubleshooting

05003-52-02

DDE 5500 // DDE 8500

35

7.6 Replacing filter cartridges

CAUTION

Damage due to dust release



Maintenance, cleaning, repair and emptying work may be done only by

expert personnel.



Wear personal protective equipment.

-

Respirator mask (particle filter class P3)

-

Protective clothing

-

Protective gloves

-

Eye protection



Set up locally filtered forced-air ventilation where the product is being

maintained, inspected or cleaned.

After an extended period of operation, the filters clog up slowly due to the ingress
of extremely fine dust in the pores. Jet pulse cleaning can no longer remove this
penetrated dust. Filters must be replaced with new ones.

The  filter  cartridges  must  be  checked  at  least  every  6  months  with  a  visual
inspection for wear and damage.
After 1000 operating hours at the latest, the filter cartridges must be replaced with
new ones.
This  work  should  be  done  only  by  an  expert  wearing  personal  protective
equipment!

If possible, filter replacement must be done when there is no work going on. This
process requires 2 people wearing personal protective equipment.

Also pay attention here to the supplementary maintenance instructions!

«
...
35
36
37
38
39
...
»

Содержание 05.003

















































Отзывы:

Нет отзывов