34
DDE 5500 // DDE 8500
05003-52-02
7.5 Dismantling the outlet element filter mat
CAUTION
Damage due to dust release
Operate the product only with the complete filtration system.
Regularly check whether the filter mats are clogged.
CAUTION
Risk of crushing fingers when putting the lid on.
Do not grab between housing and lid.
A filter mat is installed on the outlet element in the cover. This must be checked
regularly and replaced where necessary. Perform a visual inspection when you
take off the cover off the product during cleaning, repair or maintenance work. To
do this:
1. Switch off the extraction process.
2. Disconnect the compressed air supply.
3. If necessary, empty the compressed air tank by means
of manual cleaning.
Wait approx. 5 minutes while the dust is collected in
the collection containers.
4. Remove the fastening screws on the outlet element.
5. Remove the cover for the outlet element.
6. Remove the used filter mat without leaving residue.
7. Clean the inside of the outlet element with a suitable
industrial vacuum cleaner or with a damp disposable
cloth.
8. Insert new filter mats.
9. Place the outlet element back on the product.
10. Insert the fastening screws in the holes and tighten by
hand.
11. Re-connect the compressed air supply.
12. Switch on the product.
The product is ready for operation
.