Essilor Pro-B 300, Руководство пользователя

Страница: 82 / 140

8. Picture mode
Acts as an aid to manually position the drill-holes on a shape as part of the mechanical tracing of a
power lens, a demo lens or a pattern.
9. Zoom
10. Create and set the drilling points for both eyes simultaneously
11. Symmetrically transfer the drilling points from the temporal to the nasal side or vice versa
12. Modify the selected value
13. Import a drilling model from the shape management screen
14. Archive the shape and create a new job based on the job displayed
15. Back to the centering screen
◦ Press to save the changes and return to the centering screen.
◦ Press to return to the centering screen without saving the changes.
2. C
ONFIGURING A DRILLING POINT
This section describes the procedures for the creation and positioning of a drilling point:
• Creating a drilling point
(
F
p.82)
• Delete one drilling point
(
F
p.84)
• Dimensioning a drilling point
(
F
p.84)
• Adjusting the position of a drilling point
(
F
p.86)
The positions of the various drilling points must be set before the centering of the lens.
Setting the drilling points on both eyes simultaneously
• If you have done an asymmetric binocular tracing, you can create and set the drilling points
simultaneously on both shapes.
◦ Create or modify drilling points for both eyes simultaneously
◦ Create or modify drilling points for each eye separately
• In symmetric binocular or monocular tracing, the drilling points are automatically positioned on
both eyes, you can however manage the drilling points on the left side independently of the
right side:
◦ press : drillings are no longer linked .
a. Creating a drilling point
Press to create a new drilling point.
1
Pro-B 300 > v1.0 - 03.19
82
U
SER
M
ANUAL
> V. P
REPARING A DRILLED JOB