
This section shows the maintenance operations permitted for the operator to perform.
Maintenance must be carried out with the device turned OFF and the cable disconnected from the mains.
1. C
LEANING
THE
DEVICE
Cleaning of plastic parts and the casing must be done with a damp soft cloth. Always avoid directly spraying
the parts of the device.
a. Cleaning the lens
Particular attention must be paid to the cleaning of the front lens in order to not remove the anti-reflection
coating, decreasing its exam performance. "Berkshire Bluesorb® 750" cloth moistened with 96% neutral
pure ethyl alcohol or moistened lens cleaning wipes can be used.
b. Cleaning the cheekbone and forehead rests
All parts in contact with the patient must be disinfected after each exam with a cloth moistened with a
common disinfectant.
The use of jets or sprays of water or other substances that can damage the
surfaces is not permitted.
2. P
ERIODIC
CHECKS
The integrity of the power cord and any cracks on the casing of the device or AC/DC adaptor must be
checked on a weekly basis. In the event of breakage, immediately contact your service representative.
Retina800 - Fundus camera > V2 - 06-2019
104
U
SER
MANUAL
> VII. M
AINTENANCE
Содержание Retina 800
