Essentim Scope 4, Руководство пользователя

Страница: 15 / 20

Static Mode
In Static Mode, measured data is always transmitted and stored at the same interval. The time
value can be set in static mode via the Magic Time.
The figure shows the data points of a scope in Static Mode with a Magic Time of 15 seconds.
The distance between the measuring points is always constant.
Logger Mode
In Logger Mode, the data is stored only in the local memory, the data is not sent via Bluetooth.
The measurement interval is determined by the Magic Time. In order to read the data, the
button of the scope must be pressed while the scope is in the receiving area of the sensor
network. The data can also be requested manually via the app.
Note
Please refer to our video tutorials and the detailed user guide for the app to
help you understand how to use the feature.
Note
In Dynamic Mode, time describes the maximum transmission and storage
interval between two measuring points.
In Static Mode, time describes the exact transmission and
Storage interval between two measuring points.
In Logger Mode, time describes the exact storage interval between two
Measuring points.
Scope-designation (App)
The scope designation can be freely defined via app.
The scope can be assigned an individual designation of up to 16 characters.
15
user manual scope - version 1.1