Essentim Scope 4, Руководство пользователя

Страница: 14 / 20

The readout is done automatically in a sensor network of essent im or can be triggered
manually by the user through the app.
Operating modes (App)
Different situations require different behavior of the scope. We have defined three possible
modes to perform a variety of measurement tasks.
Operating modes can be set via app. By default the "Dynamic Mode" is defined. The scope
also has the "Logger Mode" and "Static Mode". These can be set to implement data
monitoring, data logging or long-term measurements.
Magic Time (App)
The Magic Time has to be set via app. The default is set to 300 seconds .
In all three operating modes, this time defines a characteristic interval for the measurement.
Dynamic Mode
In Dynamic Mode, the transmission and storage interval of the measured values varies
automatically. The selection criterion used is the change of a measured value: If the measured
value changes steadily, the data is transmitted frequently, it changes only rarely (static
ambient conditions) and is only transmitted in the maximum time interval. The maximum
time interval is defined by the second parameter ("Magic Time"). The minimum measurement
interval is set to 6 seconds. A er each measurement, it is decided by comparison with the
previous measurement whether this measurement should be transmitted or not.
This dynamic behavior optimizes the number of measurement points depending on how
many changes occur in the environment and thus helps to save energy while working for the
best possible resolution of interesting times.
The figure shows the data points of a scope in Dynamic Mode with a Magic Time of 60
seconds. The distance between the measuring points is small when many changes occur and
is greater (measured value transmission every 60 seconds) when all values are constant.
14
user manual scope - version 1.1