essentiel b ESLHP8-2b, Руководство пользователя, Страница: 23 / 32

• COOL CYCLE
The laundry is simply aired out for 10 minutes, without hot air. You can use this
programme to air out your clothes that have been left in closed environments for a long
period of time and, in this way, eliminate unpleasant odours.
3) Timed programs:
• TIMER
Turn the programme selection knob to (Timer) and press the (Buzzer/Timer)
button one or more times to select a drying time.
You can select a drying time of 10, 20, 40, 50, 60, 80, 100, 120, 140 or 160 minutes.
With this programme, the appliance dries for the selected time regardless of the drying
level.
4) Optional functions:
Turning off the audible tone
Your device will emit an audible tone when a cycle ends. If you do not want the tone to
sound, press the
(Buzzer/Timer) button. If the indicator lamp is lit, there
will be no audible tone at the end of the cycle.
You can select this option before or after starting the cycle.
Selecting the drying level
Press the (Drying level) button before starting a programme to adjust the drying
to the desired level. The duration of the selected programme will be adjusted according
to your selection.
N
ote
: The drying level can only be changed before the start of the programme.
Programming a delayed end
You can program a delayed end of up to 24 hours.
1.
Open the door and place your laundry in the drum, and then close the door.
2.
Choose a drying programme.
3.
Press the (Delayed end) button to select the desired delayed end.
The delayed end indicator lamp lights up.
N
ote
: when you press and hold down the (Delayed end) button, the time will
scroll quickly.
4.
Press the
►
II (Start/Pause) button to save the delayed end time. The time countdown
starts, the “:” for the countdown flashes. The display shows the time for the drying
programme plus the programmed delayed end time.
NOTE: You can add or remove laundry during the countdown.
5.
At the end of the countdown, the delayed end indicator lamp switches off and the
programme starts.
To change or cancel a delayed end before the start of the programme, switch the
appliance off by turning the programme selector knob to the
(off) position, then
switch the appliance back on and repeat the above procedure if you wish to programme
a new delayed end.
Indicator lamps
1) “Tank” (water collection tank full):
At the end of the programme, the tank indicator lamp lights up to remind you to empty
the water tank. If you forget to empty the tank, the dryer may stop working and go
into standby mode. In this case, empty the water tank and press the
►
II (Start/Pause)
button to restart the cycle. The warning lamp goes out.
2) “Filter” (cleaning the lint filter):
The filter indicator lamp lights up to remind you to clean the lint filter in the drum at the
end of the cycle.
3) “Condenser” (cleaning the condenser filter):
This indicator lamp lights up to remind you to clean the condenser filter.
44
45
EN