Installing the Indoor HD Camera
6
WeR@Home™ HD Camera User Guide
4.
Installing the Indoor HD Camera
You can mount the HD indoor camera on a table, or on a wall or ceiling. Before you install, make sure
to add the HD camera to WeR@Home™, refer to Chapter
2 on page 4.
To install the indoor HD camera on a table:
1.
Place the camera in the location you want.
2.
Loosen the adjustment knob. Move the camera to the position you want. Tighten the adjustment
knob.
3.
Connect the power cable.
4.
If you are using a wired connection, connect the Ethernet cable to the HD camera.
To install the indoor HD camera on a wall or ceiling:
1.
Prepare the following equipment:
A drill with an appropriate bit
A Philips screwdriver
If you are using a wired connection, an Ethernet cable long enough to reach between your
internet router and the location where you plan to install the HD camera
2.
Select a location based on the following guidelines:
Clean, dry, smooth surface that can support the weight of the camera.
Near a power outlet
Not exposed to direct sunlight
Not in greasy and humid locations, like a kitchen
Not in locations with extreme temperatures
3.
Apply the installation template onto the ceiling or wall where you want to install.
4.
Drill holes according to the installation template.
5.
If you are using wall anchors, insert them into the holes.
