Installing the PIR
Care@Home™ Motion Detector User Guide
21
WARNING!
A new battery can cause damage if it is incorrectly installed.
e.
Ensure that the pairing process is successful. The process can have the following results:
Success
The CP beeps and the CP ring blinks blue three times.
Failure
The CP beeps and the CP ring lights up red for two seconds. Try to
pair the PIR again.
Already paired
The CP beeps, the CP ring lights up blue, and the
EMERGENCY
button
lights up red.
NOTE:
If no additional peripheral devices can be integrated, as when the CP
memory is full, the CP beeps and the
EMERGENCY
button ring lights up red.
18.
Close the battery compartment cover.
19.
Insert the PIR into the mounting base until the PIR clicks into place. Ensure that the lens is pointing
downward.
Figure 26: Click the PIR into Place
