DESIGN TIME
Select your favorite sticker designs
and color them in. You can also design
your own original stickers, cut out little
photos or sayings from magazines,
or use pieces of leftover ribbon
– just make sure they are small
enough to fit through the top of
the sticker maker, -no wider than 1.5”.
The length is up to you.
Keep in mind that heavy cardboard
and thicker material will not work
in your machine.
CREATE YOUR
STICKERS
With the art facing up, insert your
design into the top of the machine.
Look for the arrow to help guide
you.
Maximum Sticker Width:
1.5 inches/3.8cm
Rub the clear top of the sticker, and then
peel off this layer. Remove your sticker
from the paper and then press it into
your awesome sticker book!
As you push your art into the ma-
chine, grab the sticker paper from
the bottom and pull. As you pull,
your sticker will be “fed” into the
machine.
As soon as your sticker is all the way
through, pull up on the tape and tear
it off. For best results tear as close to
the edge of the sticker as possible, so
you don’t waste sticker tape.
Try feeding the stickers into the
machine close together, but not
touching. This will also help you
conserve your sticker tape too.
1.
2.
3.
4.
Your machine comes pre-loaded with
20 feet of sticker tape. Your set also includes
a refill with 20 more feet of tape. To purchase
additional refills, visit your local toy retailer
or www.creativityforkids.com for refill
information. You can also find Xyron sticker
refills at many hobby and craft stores.
Be sure to purchase the 1.5” refill – that is the
correct size to fit this sticker machine.
Place
Pull
Peel
Rub
Stick
Color
Tear
Your sticker machine comes
pre-loaded, ready to use!
