Esse-ti ST 300V, Руководство пользователя

Страница: 32 / 36

¾
Install two AAA 1.5V batteries.
In standby mode:
¾
Dial the phone number/code you want to store.
¾
Press the Store key.
¾
Press the memory key (M1~M15) where you want to store the phone
number/code.
Note: the maximum number of digits that can be stored for each
phone number is 22 digits. If stored numbers are longer than
22 digits, only the first 22 digits will be stored into the
selected memory location.
At the end:
¾
Remove the batteries.
Use memory key
¾
Pick up the handset.
¾
Press the memory key (M1~M15).
Changing stored phone number or code
¾
Follow the steps described in “Storing telephone numbers or codes into
memory key”.
The new phone number or code will automatically replace the previous one.
Putting a call on hold when connected to the
trunk line
When ST200-S is connected directly to the trunk line (not to a PABX) you
have to press the
Hold key in order to put a call on hold.
¾
Press key.
The outside line will still be retained just listening to music, so the other party
cannot hear your conversation. You may replace the handset.
¾
If the handset is not replaced press key, otherwise pick up it, go
back to normal conversation.
32 DESCRIPTION