Esse-ti GSM 200, Инструкция по установке и эксплуатации, Страница: 8 / 16

Pagina 8
Inserting the SIM card
Before inserting or replacing the SIM card, always
make sure that the module has been disconnected from
the mains and that no electrostatic discharge is present
in order to avoid damaging it. Take all necessary
measures to avoid electrostatic discharge.
¾
Shift the SIM card housing cover upward and lift
it.
¾
Carefully slide the SIM card in its housing cover.
¾
Lower the SIM card housing cover and shift it
downward until it blocks.
WARNING
The SIM Card must
have the PIN code
DISABLED. If the Sim
card has the PIN Code
enabled it is necessary
to disable it by means
of a normal mobile
phone.
¾
Close the module cover.
Inserting the antenna
¾
Screw the antenna in to the connector on the top
of the module.
WARNING
NEVER connect
GSM200 module
without having
installed the antenna.
The module may
damage.