Esse-ti GSM 200, Инструкция по установке и эксплуатации

Страница: 14 / 16

Pagina 14
GSM200 installation
recommendations
•
The module is provided with a 3m. cable. Use a cat.5
or higher cable to connect the GSM200 module at a
longer distance (up to 100m).
•
The minimum recommended distance, between the
GSM200 module and the elevator alarm system, is
50cm.
•
The GSM200 module must be installed in a location
where the radio signal allows for using the GSM
system.
•
It is advisable to leave plenty of space around the
module for maintenance operations.
•
Do not lay the connection cable near the 230Vac
mains.
•
Do not install the GSM200 module outdoors, since it
lacks protection devices against weather conditions
that can damage the module (water, humidity, etc.).
•
Do not install the GSM200 module near electronic
(radio or TV sets, Personal Computers, wired radio
systems, etc.) or magnetic (credit cards, floppy disks,
etc.) devices that could be subjected to RF interference
from the module: recommended distance from the
antenna is min. 2.5m.
•
Do not install the GSM200 module near medical
devices. Its operation may cause damage to hearing
aids or pacemakers.
•
Always make sure that the device operation is
permitted in the place of installation (i.e. installation is
not allowed in hospitals, airplanes, etc.).
Note: when connecting the GSM200
module to the Helpy L300 or
L200, please make sure that a
12V battery is connected to the
terminals BATT of the device.