98
ENGLISH
I
Press ‘OK’ to confirm.
I
Select
Blockage
by using UP and DOWN keys.
Ø
Select the desired handset No. from an available number list (example if
it is displayed:
1 – 3 – –
, you can press 1 or 3 in the alphanumerical
keypad), the display wil indicate
Block HS: 3:
if you pressed 3 as in the
example.
Ø
Enter number to block, ex 0 or 00.
I
Press ‘OK’ to confirm.
Ø
Enter Base Pin
BS_PIN?:
(Default Base Pin is the last four digits of
serial number you can find at the bottom of base station).
I
Press ‘OK’ to confirm.
I
Press ‘Esc’ to leave the setting.
Now if you try to dial a number beginning by the block special number
programmed, the display will show
<< Fail >>
I
Press ‘OK’ to return in the stand-by mode.
Nota: To enter several Block special numbers you must enter them
separated by
key, e.g. to block both international calls
(sequence ‘00’) and a selected area calls (sequence ‘071’)
enter:
00R071
.
To Disable Blockage
I
Press ‘MENU’ when the unit is in standby mode.
I
Select
Base setting
by using the UP and DOWN keys.
I
Press ‘OK’ to confirm.
I
Select
Access
by using the UP and DOWN keys.
I
Press ‘OK’ key to confirm.
I
Select
Blockage
by using UP and DOWN keys.
