96
ENGLISH
The number stored in this position will be dialed before the desired number
every time it begins with “0”, not matter the way the selection has been
done such as manually, speed dial, from phonebook ...
Note: If you don’t want to use the pre-selection number to make a
call, you must put a
#
character before the phone number.
Pin Call ( To access external line with
authorization )
To Activate Pin Call to Individual Handset or all Handsets
I
Press ‘MENU’ when the unit is in standby mode.
I
Select
BASE SETTING
by using the UP and DOWN
keys.
I
Press ‘OK’ to confirm.
I
Select
ACCESS
by using the UP and DOWN keys.
I
Press ‘OK’ to confirm.
I
Select
PIN CALL
by using UP and DOWN keys.
The Pin Call enabled handset’s list will be displayed. A Pin Call disabled
handset is indicated by “
—
“. E.g. if the PIN call is enabled only on the handsets
1 and 3 the display will show
1 — 3 — —
.
Ø
Select the handset No to enable.
I
Press ‘OK’ to confirm.
Ø
Enter Base Pin
BS_PIN?:
(Default Base Pin is the last four digit of serial
number you can find at the bottom of base station).
I
Press ‘OK’ to confirm.
I
Press ‘Esc’ to leave the setting.
Now every time you try to make a call you will be asked the Base Pin,
BS_PIN?:
, to go on you must enter the Base Pin. If the Pin is not entered
within about 15 seconds the display will show <<
Hang up
>>.
