Esse-ti CT290 Dect, Руководство пользователя

Страница: 83 / 108

ENGLISH 83
I
Press OK to confirm.
I
Select NEW HS by using the UP and DOWN keys.
I
Press OK to confirm.
Ø
- Enter the Sub Pin code (Default is 1590).
I
Press OK to confirm.
The display shows a list containing the handsets which have not been registered
yet. The handsets which have already been registered are indicated by a ‘-‘. For
example if the handsets 1,2,3 and 4 have already been registered, the display
shows “- - - - 5 6 7 8 9”.
Ø
Select the handset you wish to register by entering a number from 1 to
9 (1 = handset No. 1). To select a handset from N. 10 to N. 15,
otherwise, press the
DOWN key . The display will show “ 10+ ”
followed by a list containing the handsets not yet registered. In the list
each number is equal to the corresponding handset number minus 10.
For example to select handset 0 you must enter 0, to select handset 12
you must enter 2 and so on.
I
Press OK to confirm.
In the list the selected number is replaced by a ‘-‘.
Now you have successfully granted New Handset registration and Pre-assign a
handset No. ( Int. No. ) to this new handset. Please proceed to next step
“Register a Handset to the Base Station”.
Register a Handset to the Base Station
After above step “Grant New Handset Registration” is done, please take the
new handset to continue below steps.
Note: For other brand DECT handsets with GAP, please consult
with the manufacturer’s user manual to proceed the
subscription.
I
Press the Menu key when the unit is in standby
mode.
I
Select HS REGISTER by using the UP and DOWN
keys.