
7
Note: when executing the program, if correctly set, M-Blaster will automatically
position on the “USB” page.
After having done this, launch the program by double clicking on the icon created
during installation. As for the software utilization, please refer to the on-line guide
included with the software.
SWITCHING ON
To switch the M-Blaster on, insert the supplied adapter connector into the
corresponding socket positioned on the back panel and push the ON button.
The display will light up and after a few seconds, you will see the following:
READING PROGRAM
Shortly followed by:
ESS
M-BLASTER
VERSION XXXX
MIDI Karaoke Mp3 Player
For its correct functioning M-blaster needs the Data storage unit (Compact Flash
Card), to be inserted in its proper housing (fig1/6). Otherwise, the following
message will appear on the screen:
“COMPACT FLASH NOT PRESENT”
Note: The Compact Flash Cards are formatted when the product is sold;
however, if necessary, the formatting should be executed with the following
characteristics: FAT 12/16 bit formatting (it will be implemented to FAT 32).