
6
6) Port MIDI Out to connect an external sonic generator;
7) USB connector to connect M-Blaster to a PC;
8) Switch on;
9) Connection to the supplied external power supply adapter;
POWER SUPPLY
Connect the adapter plug (male) to the PWR IN female connector positioned on
the M-Blaster back panel (Fig.2/9). Then connect the adapter plug to a power
point.
IMPORTANT
Please only use the adapter supplied, otherwise the equipment can be
damaged.
AUDIO CONNECTIONS
Connect the M-Blaster Audio Outputs (fig 2/3) to your audio equipment (mixer
line input or directly to the line inputs of audio equipment - AUX or TAPE - of your
home Hi-Fi or similar).
Note: In order not to damage the audio equipment it is strongly recommended
that M-Blaster is not turned on before the amplification set-up.
HOW TO START
M-Blaster is supplied with “e-link” software for the Personal Computer which
allows you to transfer MIDI and MP3 files directly from your PC to the MBlaster
data storage unit (Compact Flash Card). This software can also be used for
backup operations.
First of all install the supplied software on your PC, then connect your M-Blaster
through a standard USB cable A/B (such as the one used for USB printers) to a
properly functioning USB port on the PC.