ESS 600-1350, Руководство по установке и эксплуатации, Страница: 13 / 18

Upper & Lower Belt Tracker 13 14/06/2021
SECTION 8
– TROUBLE SHOOTING
PROBLEM
– Mounts don’t fit in desired location
CAUSE SOLUTION
Belt is too far below the stringers Use alternative mounts available from ESS
Belt returns between the stringers
The belt will need to be deflected into position
along the length the Belt tracker will be
mounted.
PROBLEM
– Groove worn into the guide roller
CAUSE SOLUTION
Guide roller bearing may be seizing Replace guide rollers
Torque arm, Front or Reat pivot
points may be seizing Check pivot points and replace bushing and
grease if required
PROBLEM
– Belt is not Tracking correctly
CAUSE SOLUTION
Belt Tracker may not be adjusted
correctly
Adjust Belt tracker as mentioned in Installation
There may be multiple points of
misalignment in the structure
Multiple Belt Trackers may be required