ESS 600-1350, Руководство по установке и эксплуатации, Страница: 12 / 18

Upper & Lower Belt Tracker 12 14/06/2021
SECTION 7 - ROUTINE MAINTENANCE AND SERVICE
Regular inspections and servicing is the key to an efficient conveyor system. It is recommended
that the Belt tracker be inspected once per week. Actual intervals will vary considerably from plant
to plant.
Inspection
Inspect the condition of the Belt Tracker. Check the pivot points and guide rollers for free
movement.
If maintenance is required
Step 1
Shut down and lock out the conveyor.
Step 2
Grease the service nipples on the torque arm and the front and rear cross frames.
If required replace guide rollers.
Step 3
Remove locks or tags and restart belt. Observe Belt Tracker action. Clean up work
area.